INSPECTIONS
CTI technicians perform inspections on condensers and heat exchangers which include three-ball micrometer measurements, rigid borescope, and full length fiber-optic video probe inspection. Other services available upon request.

The 3-ball micrometer inspection typically consists of tube I.D. readings taken at the various depths into the tubes. This will determine not only the extent and depth of erosion, but the necessary dimensions required for the CTI Shield. Extensions are also available.

CLEANING
CTI offers a wide variety of tube cleaning methods, from removing mud and obstructions (CTI Jet-brush) to light scale (rotary cutter/buffer or metal bladed cleaners) to heavy duty deposits (water tube drill).

COATINGS
CTI applies 100% solid epoxy coatings formulated to suit specific job conditions, including abrasion, erosion/corrosion and galvanic action.

RETUBING
If one of CTI's patented restoration systems cannot solve the problem, heat exchangers can be retubed in-situ or in one of our fully equipped workshops.

TUBE CLEANERS
      • CTI Nylon Jet-Brush
      • Wire Brush
      • Metal Bladed Cleaners
      • HP Water Drill

TUBE PLUGS
      • Fiber
      • Brass
      • Rubber
      • Steel
      • High Pressure
      • and more...

TUBE CLEANING KITS
Kits include the following gear:
      • Air/Water Guns
      • Manifolds
      • Hoses
      • Fittings
      • Catch Nets
      • Talmac Rods

INSPECTION EQUIPMENT
      • 3-Ball Micrometers
      • Rigid Video Boroscope
      • Fiberoptic Video Boroscope

CLICK HERE TO REGISTER

Need information in another language?
Register above to see other languages available.